My Account
My Lists
My Orders
My Invoices
Track My Order
The charger brick just lost its job.
Australia’s first
65W Twin USB-C outlet.
APP2HUSB2C65
10A Double Power Point 65W Twin USB-C
ARIA’s 10A Double Power Point with Twin USB-C is Australia’s first wall outlet to deliver laptop-capable charging, up to 65W at 20V, from either USB-C port while keeping both outlets available. Used together, the ports share 20W + 45W. Its slim 6.25mm Matte White polycarbonate cover sits easily with pale walls, light timber and soft stone, with an oil- and grime-resistant matte finish. Two 54mm hole-saw cut-outs speed installation through cabinetry and panelling. Captive-screw clamp terminals accommodate up to four 2.5mm² conductors. Shuttered sockets add protection, while tool-removable mounting screw covers keep fixing points accessible. Backed by a seven-year parts-and-labour warranty.
Slim 6.25mm profile
Two 54mm cut-outs
Fits 4 × 2.5mm² conductors
7-year warranty
Laptop power.
Built into the wall.
ARIA turns in-wall USB from a convenience into a serious power source. Deliver up to 65W from one port for laptop-capable charging, or 20W + 45W across two devices. No charger brick. No clutter. Just power where it belongs.
No brick required.
two devices.
Confidence,
Covered.
50,000
mechanical cycles
Four times the required minimum. We kept going.
30,000
electrical cycles
Under load. 12,000 required. We tested 30,000.
30,000
plug cycles
In. Out. 30,000 times.
UV, weathering,
abrasion
Finishes tested against sun, weather and everyday wear.
Stainless-steel reinforced plates
Takes screw load off the face, helping corners stay flat.
No hold music
Local technical support, without the runaround.
Seven details
that set ARIA apart.
Designed for the wall. Built for the work.
144 products for the whole home.
Coordinated plates and mechs bring power, control, fast charging, data and accessories together across four finishes, giving every room one cohesive look.
See the full range >
Four finishes. Not shy. Not shiny.
Two polycarbonate mattes made to resist oil & grime. Two anodised aluminium signatures, with contrasting edges that catch light without chasing attention.
Meet the finishes >
Slim. Not timid.
A stainless-steel-reinforced grid takes screw load off the slim 6.25mm face, helping corners stay flat without extra brackets or bulk.
See what’s behind the plate >
Australia’s first 65W Twin USB-C outlet.
Laptop-capable power, built into the wall through high-efficiency power conversion and ventilation. Get 65W solo or 20W + 45W together. No charger brick.
Shop 65W USB-C >
Installer-first. Right down to the terminal.
Familiar 30 Series mechs, generous 16mm² terminals, captive screws and 54mm hole-saw cut-outs make planning, wiring, and fit-off faster, from wall to cabinetry.
Discover installer benefits >
Dimming, in a whole new light.
Choose a familiar rotary dial, or ARIA’s signature LED-backlit toggle dimmer. Press the toggle on/off, push up to brighten, down to dim, with smooth fades.
Explore ARIA dimmers >
25-year warranty. Tested past the required minimum.
25-year parts-and-labour cover on non-electronic products. Seven years on electronics. Backed by 50,000 mechanical, 30,000 loaded electrical and 30,000 plug cycles.
See the proof >Shop the range.
| Product Codes | Finish |
| APP2HUSB2C65 | Matte White – Polycarbonate Cover Plate Material |
| APP2HUSB2C65B | Matte Black – Polycarbonate Cover Plate Material |
| APP2HUSB2C65LGB | Light Grey Brass – Anodized Aluminium Alloy Cover Plate Material |
| APP2HUSB2C65DGS | Dark Grey Silver – Anodized Aluminium Alloy Cover Plate Material |
| Rated Current | 10A |
| Rated Voltage | 250 V AC |
| Switching | Single Pole [Active Only] |
| Connection Type | 3 cage terminals with captured screws |
| Terminal Size | 16mm² (accommodates 4 x 2.5mm² cables) |
| Housing Material | Polycarbonate |
| Contact Material | Silver alloy |
| Track Material | Copper alloy |
| USB ports | 1 Port: 65W Max [5V-20V/1A-3.25A] 2 Ports: Top 20W Max, Bottom 45W Max [5V-20V/1A-3.25A] |
| Dimensions | 120mm [W] x 77.7mm [H] |
| Recommended Cut-out | 95mm [W] x 58mm [H] |
| Compliance | AS/NZS 3112 AS/NZS 3100 |
| Warranty | 7 Years |
