COMPATIBLE WITH VOLTEX 10YR BATTERY SMOKE ALARM (SAS115BW FROM BATCH B211110 onwards), 240V SMOKE ALARM PRODUCTS FITTED WITH A WIRELESS MODULE (SASWM) DISPLAYING THE REMOTE SYMBOLAND  SASMH9VRF

NOTE: All 240V smoke alarms (SAS135MH) need to be fitted with a Wireless Module (SASWM) for full remote compatibility.

SASMH9V (Without- RF) model is not compatible.

To Pair a Remote: Appoint a smoke alarm "Master" & put it into Pairing Mode. Press the NET button Once on the Remote.

Multiple Remotes can be connected to the same group of smoke alarms. They will need to be each paired to the same master smoke alarm.

(To confirm battery is good, press the 'NET' button once, and the red LED should illuminate steady for 30 seconds)

Warning: The Remote contains a lithium button battery. Always ensure the battery cover is tightened securely at all times.

**Note: Transmission distance will vary depending on structural components.

Power	DC 3V (CR2450)- Replaceable
Connectable with	SAS115BW*; SASWM* (See note below)
Wireless Frequency	433.42MHz
Wireless Distance	>3 meters **
Temperature Range	10~45°C
Humidity Range	less than or equal 80% RH
Battery Lifetime	Min 1 year
Compliance	AS/NZS 4268
Standby Current	less than or equal 3uA
Operation Current	less than or equal 30mA
Size	53mm(W) x 62mm(H) x16mm

* Compatibility Note: This remote is connectable with Voltex Smoke Alarm products displaying the remote symbol. 

Each SAS135MH 240V smoke alarm (with a 3V backup battery) needs to be fitted with a Wireless Module (SASWM) for full remote compatibility.

SASMH9VRF 240V smoke alarm (with a 9V backup battery) model is required if connecting for full remote compatibility. SASMH9V is not compatable with remote.

** Note: Transmission distance will vary depending on structural components.