In-wall Fan Run-on Timer. 5m, 15m, 30m time delay. Requires both a fan and light to be connected.

Description
Specifications
Download

From one wall switch, the user turns both the lights and the fan on. When the lights are manually turned off from the switch, the fan continues to run for the set off time delay, then turns off automatically

No Neutral connection required at the timer
Designed to be installed behind a wall plate (wall plate not supplied with the timer)
Fan continues to eliminate steam and odour after turning the lights off and leaving the bathroom
Dimensions 39mm x 41mm x 12mm
Fan off delay can be set to 5, 15 or 30 minutes (15 minutes default)
Fan on delay can be set to 3 seconds (default), 1 minute or 3 minutes
Works in conjunction with a standard switch mechanism (not supplied with the timer)
7 Year Warranty
Maximum Load 1A, Minimum Load 2.5W
NOTE: Must be used with both a fan and a light connected. Use the IWT-B timer for individual fan or light Delay Off function

Supply	220 – 240V, 50Hz
Max Load	1A (all load types)
Min Load	2.5W
Compatible Load Types	Resistive loads Inductive load (contactor coil) Tungsten filament lamp load Externally ballasted lamp load (LED, CFL or Fluorescent) Self-ballasted lamp load (LEDi or CFLi) Small motor load – M.1 (exhaust fan typical)
Fan Turn-On Delay	3 seconds (default) 1 minute 3 minutes
Fan Turn-Off Delay (run-on time)	5 minutes 15 minutes (default) 30 minutes
Switch Input type	Toggle ON/OFF
Load Switching type	Semiconductor switching device
Dimensions	39 x 41 x 12 mm
Weight	20g
Ingress protection	IP30
Wire length	110 mm
Ambient Operating Temperature	0 to 50°C
Ambient Storage Temperature	-10 to 70°C
Humidity	0% to 95% RH non-condensing
Fault Protection	Open circuit Short circuit Overload Over temperature
Material	Flame retardant polycarbonate